Sharpening Stones 6"х1" Boride NO BLANKS T2 series

Description: DESCRIPTIONBoride sharpening stones are used for sharpening knives Hapstone sharpeners. Boride offers a wide range of stones with different performance values and different rates of wear. Boride T2 series stones are made of aluminum oxide. All Boride stones are 6 mm thick and are mounted on high-quality aluminum blanks. Stones that are 6 mm thick offer a longer life cycle than stock Edge Pro stones that are 3 mm thick and are becoming a community standard.Boride stones should be used with one of these lubricants:· Water· Soapy water· Boride Bori-Lube· Water solution of Di-propylene glycol· WD-40 (for experienced users only)· Refined olive oil (for experienced users only)· Oleic aсid (for experienced users only)In case of using the water as lubricant, soak the stone in water for 1-2 minutes. In case of using the oil, put a small amount (1-2 drops) of honing oil on the stone’s surface and spread it evenly over the stone with a finger. If the stone absorbs the honing oil, use larger amount of oil.Boride Stones may have the following minor defects:· Saw strokes on the work surface· Residues of lacquer· Small chips at the corners and along the edges (no larger than 1 mm)All these defects will be eliminated during preparation of the stone. The majority of sharpening stones requires preparation, and Boride stones are no exception. Additional lapping can be performed by customer to improve sharpening quality. We recommend to use loose silicon carbide powder or diamond lapping plate. 8 stonesT2 150 T2 220 T2 320 T2 400 T2 600 T2 800 T2 1000 T2 1200Aluminum OxideWear-resistant series for all steels.

Price: 308 USD

Location: Thousand Oaks, California

End Time: 2024-12-27T22:35:50.000Z

Shipping Cost: 4.63 USD