Description: KGG 60-20Gripper for small componentsID 303075Gripper for small components KGG, Size: 60, pneumaticStroke per jaw: 10 mmClosing force: 45 NOpening force: 53 NMax. ambient temperature: 90 °CTechnical details Stroke per jaw [mm]10Closing force [N]45Opening force [N]53Closing force (with finger lengths of 0 mm) [N]50Opening force (with finger lengths of 0 mm) [N]55Weight [kg]0.09Recommended workpiece weight [kg]0.23Cylinder volume per double stroke [cm³]3Min. operating pressure [bar]2.5Max. operating pressure [bar]8Nominal operating pressure [bar]6Closing time [s]0.03Opening time [s]0.03Max. permissible finger length [mm]40Max. permissible weight per finger [kg]0.04IP protection class40Min. ambient temperature [°C]5Max. ambient temperature [°C]90Repeat accuracy [mm]0.02Cleanroom class ISO 14644-1:19997Length X [mm]64.4Width Y [mm]18Height Z [mm]29Moment Mx max. [Nm]1Moment My max. [Nm]2Moment Mz max. [Nm]2.5Max. axial force Fz max. [N]150Gripping forceis the arithmetic sum of the individual force applied to each jaw at distance P (see illustration).Finger lengthis measured from the reference surface as the distance P in direction to the main axis. The maximum permissible finger length applies until the nominal operating pressure is achieved. With higher pressures, the finger length must be reduced proportionally to the nominal operating pressure.Repeat accuracyis defined as a distribution of the end Position for 100 consecutive strokes.Workpiece weightis calculated for force-fit gripping with a coefficient of static friction of 0.1 and a safety factor of 2 against workpiece slippage at acceleration due to gravity g. For form-fit or capture gripping, there are significantly higher permissible workpiece weights.Closing and opening timesare movement times of the base jaws only, without application-specific gripper fingers. Valve switching times, hose fill times, or PLC reaction times are not included, and are to be considered when cycle times are calculated.Operating principleDirectly driven base jaws, synchronized by rack and pinionHousing materialAluminum alloy, anodizedBase jaw materialAluminum alloy, anodizedActuationpneumatic, with filtered compressed air as per ISO 8573-1:2010 [7:4:4].
Price: 210 USD
Location: Izmir
End Time: 2024-11-30T09:59:57.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: SCHUNK
Model: KGG 60-20
Type:: KGG60-20
Country of Manufacture: Germany
MPN: 303075
Country/Region of Manufacture: Germany
Unit Quantity: 1
Part No.:: 0303075
