Description: Pillar installation assists in accuracy as it prevents crushing of the stock and prevent stress cracks. Pillars also keep the action from twisting or moving. Consistency is key in accuracy. These pillars are for those wishing to inlet their own rifle stocks. The pillar Bedding Studs are CNC machined Stainless Steel. The threaded rod is used to assist in placing the pillars and cutting to them to length. Simply scuff up the exterior with some sand paper prior to installation and be sure to degrease. This a DIY kit. In order to utilize this kit you must drill out the stock, and epoxy or "glue" these into place. Final fit and finish will need to be done during installation. A chamfer may be required on the bottom inner diameter of the pillars to allow for action screw fitment. A drill press is recommended but many have used a hand drill or sand paper around a dowel with some patience. This system is used to keep bedding compound out of the threaded action screw holes and off of the action screws while bedding a stock. We Manufacture a total of 3 Bedding Pillars that will fit actions such as the Remington 700, Mauser 98, & Winchester Model 70's. This is for the Winchester Model 70.
Price: 29.99 USD
Location: Gravois Mills, Missouri
End Time: 2025-02-02T20:25:50.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
For Gun Make: Boyds and after market stocks
Compatible Caliber: All
Gauge/Caliber: All
Specific Part: Pillar
Color: Plain
Material: Aluminum, Stainless Steel
MPN: Does Not Apply
Brand: Power Custom
Type: Stock & Forend Parts
Firing Block: None
Features: Cut to Fit
For Gun Type: Rifle, Bolt Action
Country/Region of Manufacture: United States
