LE Wilson Neck Sizing & Full Length Sizing Die Bushing .305 in # B-305

Description: Neck Sizing & Full Length Sizing Die Bushing .305in B-305 NEW! The L.E. Wilson Neck Sizing Bushing will allow the reloader to custom fit the L.E. Wilson Neck Sizer Die to any brass and bullet combination. To determine the correct size bushing, simply measure the outside diameter of the neck of a loaded round, then subtract .002" or .003" from the measurement. Since brass has a tendency to "spring-back" after sizing, this calculation will result in a consistent .001" to .002" inch of grip between the case neck and the bullet. Consistent neck tension is a key factor in quality bench rest loads. Notes: Freely interchange in all Wilson bushing type neck sizing dies. To Determine Bushing Size, measure the outside neck diameter of a loaded cartridge with a precision micrometer. From this measurement subtract .002" to .003", to allow for brass spring back and bullet tension. By selecting the correct bushing you can provide just the right amount of neck tension to properly hold the bullet without excessive resizing. Diameter: 0.305 Inches ~~~~~~~~~~~~~~~~~~~ ALL MANUFACTURERS WARRANTIES WILL APPLY ! All of our products are BRAND NEW in the box; and contain all of the parts, materials and documentation. You can expect and will receive prompt delivery of your item. We will ship your order within ONE DAY! We are unable to accept returns on used, fitted, or altered parts. Returns must be in new, unused condition and in their original packaging.

Price: 30.24 USD

Location: Sevierville, Tennessee

End Time: 2024-11-27T16:21:35.000Z

Shipping Cost: 0 USD