Description: Details Package List 1*15 GPM 12V Fuel Transfer Pump DC Gasoline (with Fuel Line only) Description: The 15 pump capacity is available for selection, making the refueling more efficient. Ball Bearing Construction, No Lubrication Required Thermally Protected And Explosion-Proof Cast Iron Material Pump Body Professional Installer is Highly Recommended (No Instruction Included) For Transfer of Gasoline, Diesel Fuel, Kerosene, Mineral Spirits, Heptane, Hexane, E15, Biodiesel, and Similar Fuels or Oils. This gasoline pump is fits for lawn tractors, boats, jet skis , snowmobiles, trimmers, and etc. SpecificationHP: 1/4 AMP: 22 Watts: 264 Flow (GPM): 15 RPM Speed: 2600 Max. Total Head : 36.96 Ft Max. Suction Lift : 8 Ft Inlet Port: 1" Outlet Port : 1" Discharge : 8 Ft Duty Cycle: 30 Min. Self-Priming: Yes Bypass Vave: Yes Seal Type: Oil Seal Nozzle Type: Manual Nose: 3/4" X 12ft Safety Information WARNING! Electrical wiring should be performed ONLY by a licensed electrician in compliance with local, state, and national electrical code NEC/ANSI/ NFPA 70, NFPA 30, and NFPA 30A, as appropriate to the intended use of the pump. Threaded rigid conduit, sealed fittings, and conductor seal should be used where applicable. The pump must be properly grounded. Improper installation or use of this pump can result in serious bodily injury, or death! WARNING! To ensure safe and proper operation of your equipment, it is critical to read and adhere to all of the following safety warnings and precautions. Improper installation or use of this product can cause serious bodily injury or death! NEVER smoke near the pump, or use the pump near open flames when pumping a flammable liquid! Fire can result! A filter should be used on the pump outlet to ensure no foreign material is transferred to the fuel tank. Threaded pipe joints and connections must be sealed with the appropriate sealant or sealant tape to minimize the possibility of leaks. Storage tanks must be securely anchored to prevent shifting or tipping when full or empty. To minimize static electricity build up, use only static wire conductive hose when pumping flammable fluids, and keep the fill nozzle in contact with the container being filled during the filling process. The pump motor is equipped with thermal overload protection; if overheated, the motor will shut off to prevent damage to the windings. WARNING! This product shall not be used to transfer fluids into any type of aircraft. WARNING! This product is not suited for use with fluids intended for human consumption or fluids containing water. Shipping PolicyPayment MethodReturns PolicyShipping Policy -Please leave us your full name, your telephone number and detailed address when ordering. -We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay the order. -We try our best to pack the products as good and safe as possible ,so they always arrive in a good condition.Payment Method -We accept PayPal only. -All major credit cards are accepted through secure payment processor PayPal. -Payment must be received within 4 business days of auction closing.Returns Policy -We offer sophisticated products at a high technological level, with the highest possible quality and the most favorable price. -With these parts you can replace your defective parts simply plug and play. -Our warranty is valid for max. 24 months without mileage limitation. -Please compare carefully with Photos or OE number before purchasing the part. -Once a problem occurs with the purchased product, please do not hesitate to let us know with Ebay messages,we will offer you refund or replacement.Product ViewProduct Description Package List 1*15 GPM 12V Fuel Transfer Pump DC Gasoline (with Fuel Line only) Description: The 15 pump capacity is available for selection, making the refueling more efficient. Ball Bearing Construction, No Lubrication Required Thermally Protected And Explosion-Proof Cast Iron Material Pump Body Professional Installer is Highly Recommended (No Instruction Included) For Transfer of Gasoline, Diesel Fuel, Kerosene, Mineral Spirits, Heptane, Hexane, E15, Biodiesel, and Similar Fuels or Oils. This gasoline pump is fits for lawn tractors, boats, jet skis , snowmobiles, trimmers, and etc. SpecificationHP: 1/4 AMP: 22 Watts: 264 Flow (GPM): 15 RPM Speed: 2600 Max. Total Head : 36.96 Ft Max. Suction Lift : 8 Ft Inlet Port: 1" Outlet Port : 1" Discharge : 8 Ft Duty Cycle: 30 Min. Self-Priming: Yes Bypass Vave: Yes Seal Type: Oil Seal Nozzle Type: Manual Nose: 3/4" X 12ft Safety Information WARNING! Electrical wiring should be performed ONLY by a licensed electrician in compliance with local, state, and national electrical code NEC/ANSI/ NFPA 70, NFPA 30, and NFPA 30A, as appropriate to the intended use of the pump. Threaded rigid conduit, sealed fittings, and conductor seal should be used where applicable. The pump must be properly grounded. Improper installation or use of this pump can result in serious bodily injury, or death! WARNING! To ensure safe and proper operation of your equipment, it is critical to read and adhere to all of the following safety warnings and precautions. Improper installation or use of this product can cause serious bodily injury or death! NEVER smoke near the pump, or use the pump near open flames when pumping a flammable liquid! Fire can result! A filter should be used on the pump outlet to ensure no foreign material is transferred to the fuel tank. Threaded pipe joints and connections must be sealed with the appropriate sealant or sealant tape to minimize the possibility of leaks. Storage tanks must be securely anchored to prevent shifting or tipping when full or empty. To minimize static electricity build up, use only static wire conductive hose when pumping flammable fluids, and keep the fill nozzle in contact with the container being filled during the filling process. The pump motor is equipped with thermal overload protection; if overheated, the motor will shut off to prevent damage to the windings. WARNING! This product shall not be used to transfer fluids into any type of aircraft. WARNING! This product is not suited for use with fluids intended for human consumption or fluids containing water. Payment -We accept PayPal only. -All major credit cards are accepted through secure payment processor PayPal. -Payment must be received within 4 business days of auction closing.Shipping -Please leave us your full name, your telephone number and detailed address when ordering. -We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay the order. -We try our best to pack the products as good and safe as possible ,so they always arrive in a good condition.Returns -We offer sophisticated products at a high technological level, with the highest possible quality and the most favorable price. -With these parts you can replace your defective parts simply plug and play. -Our warranty is valid for max. 24 months without mileage limitation. -Please compare carefully with Photos or OE number before purchasing the part. -Once a problem occurs with the purchased product, please do not hesitate to let us know with Ebay messages,we will offer you refund or replacement.Feedback On Nov 21, 2023 at 18:03:33 PST, seller added the following information:
Price: 167.3 USD
Location: Chino, California
End Time: 2023-12-22T01:54:07.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Return policy details:
Brand: OE QUALITY
MPN: 12V 15GPM DC
UPC: Does not apply
Manufacturer Part Number: fuel gasoline transfer pump 12v
Interchange Part Number: 12V DC 15GPM
Warranty: 2 Year
Type: Fuel Transfer Pump 12V DC 15GPM
Superseded Part Number: Fuel Transfer Pump 12V DC 15GPM, 12V DC 15GPM, Up, to 15 GPM, 1/4 HP motor, UL/cUL listed motor, Replacement for Diesel, Gasoline, Kerosene, E15, and Biodiesel up to B20, Built-in strainer, 2 in. threaded base for tank mounting, Heavy duty cast iron construction, Cast bronze rotor with bronze rotary vanes
Fitment Type: Direct Replacement
