Description: One, NEW, replacement, power steering hand pump, control end drive spur for Farmall 240, 340, 404, 504, 2504 or International Harvester tractors 240 if you have the Char Lynn two port power steering unit. This drive spur shaft fits inside the sleeve and spool housing as shown in the parts manual. This drive fits the hydraulic power steering unit (torque generator) 373069r92, 373069r93 and 373069r94 and is the mid shaft between the control shaft and the geroter set. This is the internal shaft that you are likely to ruin if you chip a gear tooth inside the drive spool. This shaft will then eat itself up and your geroter will seize due to an obstruction in the pump gear. This little guy takes a lot of abuse and is the culprit for most internal hand pump failures on these models. IF YOU HAVE A CHAR LYNN torque generator that will not turn in either direction, this spur gear is probably broken on the inside of the unit. This drive will NOT fit the 4 port PS unit on these same models. THIS DRIVE WILL ALSO FIT ALL CHAR LYNN S-101, 207 and 217 SERIES TORQUE GENERATORS ON ANY MODEL TRACTOR. It will NOT fit a S-102 series. Check your parts manual or contact me if you have questions or concerns This is a NEW drive shaft. IH part number for this drive is 374531r1. As you may already know, this internal drive is no longer available from CNH or CHAR LYNN as it was discontinued many years ago. Made in the USA. Free domestic shipping to US 48 states.
Price: 219 USD
Location: Cicero, Indiana
End Time: 2024-09-24T13:39:17.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
