Diode Dynamics® Hitch Mount LED C1R Pod Reverse + Brake Light Kit for 2" Hitch

Description: Diode Dynamics® Hitch Mount LED C1R Pod Reverse + Brake Light Kit for 2" Hitch Diode Dynamics® Hitch Mount LED C1R Pod Reverse + Brake Light Kit for 2" Hitch Diode Dynamics LED 3-in-one hitch light for 2-inch trailer hitches. Adds a powerful reverse light, 4th brake light, and additional running light. IMPORTANT: If you have one of the following vehicles, you will need to purchase a vehicle specific kit which we have available separately. Vehicles requiring a vehicle specific kit: 2015-2020 Ford F-150, 2021+ Ford F-150, 2005-2015 Toyota Tacoma, 2019+ GMC Sierra 1500, 2019+ Chevrolet Silverado 1500. In the Box: One (1) SSC1 Sport or C1R HitchMount LED Pod One (1) 7-Pin trailer single output harness Two (2) Zip ties One (1) T-Tap (C1R Only) Warranty: 8 year warranty Fitment Newer trucks with trailer management systems monitor the power draw on the trailer connector in order to automatically modify vehicle settings when a trailer is connected. Depending on the year and make of your vehicle, the HitchMount LED may interact with this system if equipped. The following vehicles require a vehicle-specific harness. 2015-2020 Ford F-150 2021+ Ford F-150 2005-2015 Toyota Tacoma 2019+ GMC Sierra 1500 2019+ Chevrolet Silverado 1500 Jeep: No trailer is detected, no warning messages. Note: If you would like to use a locking trailer pin to install this kit instead of the snap-fit pins, you can do so with a quick modification. Watch the video. This product is not intended to replace original factory tail lamps. Please ensure your trailer hitch has an open back before ordering. 3-IN-1 LIGHTING UPGRADE Add a high-power reverse light, additional running light, and an optional 4th brake light with the C1R HitchMount! EASY 5-MINUTE INSTALL The patent-pending snap-fit design allows you to install the HitchMount in minutes. No drilling or hitch pin required! BRIGHTER BACKUP Need an upgrade? The HitchMount LED Pod is several times brighter than stock bulbs alone, allowing you to back up confidently at night. OPTIONAL 4TH BRAKE Stand out on the road with the C1R’s high-power 4th brake light and optional SafetyStrobe feature. EASY REMOVAL Remove the HitchMount in minutes thanks to the snap-fit design! Perfect for those who use their trailer hitch often. Description Features Allows you to mount an SSC1 or C1R LED pod in any 2-inch trailer hitch receiver. Adds a powerful reverse light, 4th brake light, and additional running light. Simple 5-minute installation, with no need for custom wiring or routing wires. Optional SafetyStrobe brake light strobing. Designed and assembled in USA. Overview Add significantly more light output when backing up at night with our Stage Series HitchMount Reverse Light Kit! This kit allows you to mount one SSC1 or C1R LED pod in your 2-inch trailer hitch receiver, adding a high-power reverse light, additional running light, and an optional 4th brake light with the C1R option. With the included wiring harness, this kit connects to your vehicle’s factory trailer hitch wiring for simple, everyday operation. Brighter Backup. Factory reverse bulbs just don’t provide enough light output to back up at night confidently. By pairing our patented TIR optics with high-powered LEDs, the SSC1 and C1R included in this kit provide an additional reverse light that’s several times brighter than stock bulbs alone. Plus, they automatically come on when the vehicle is put in reverse! Additional Running Light. The Stage Series LED pods included with this kit feature a distinctive red backlight that can be used as an additional running light while driving! The backlight fully illuminates the TIR optic, providing a more unique and modern look than the small indicator LEDs found in other products. SafetyStrobe 4th Brake Light. The C1R option features a high-power red function to serve as a powerful 4th brake light, along with the low-power running light. The high-power red functionality activates anytime you apply your brakes, adding a 4th brake light to your vehicle. The C1R also features optional brake light strobing, which can be activated in 15-second intervals. By default, the C1R will flash three times when the brake lights are initially applied, for greater visibility. The SafetyStrobe feature can be easily disabled if desired. Everyday Operation. This kit is completely plug-and-play with all 7-pin trailer connectors. The included harness plugs right into your factory trailer hitch wiring for easy installation and operation. The kit operates as an additional red running light with your tail lights, and then automatically switches to a high-power backup light when your vehicle is in reverse. The high-power 4th brake light feature included with the C1R will activate anytime you apply your brakes. If you would like to have override functionality to manually turn on the reverse light anytime, you will need to purchase the universal backup harness. If your trailer connector is not 7-pin, this kit will still work for you but will require slight modification to the harness. Simple Installation. The patent-pending snap-fit design allows you to install this mount in minutes, without any drilling or need for a hitch pin. Simply insert the HitchMount into your trailer hitch receiver and the snap-fit side mounts will snap into place. Installation couldn’t be easier and takes less than five minutes! This kit is ideal for anyone who uses their trailer hitch often since removal can be done in minutes as well! Simply unplug the harness, press the snap-fit pins and remove the mount. When you’re not using your hitch for towing, you can quickly reinstall the HitchMount and plug it back in. If you would like to use a locking trailer pin to install this kit instead of the snap-fit pins, you can do so with a quick modification. Watch the video. Focused. Traditional optics like reflectors or simple lenses lose light internally and to glare, so not all of the light shines on target. Instead, the custom-engineered TIR optic in our Stage Series pods collects all of the light from the LED, and directs it only where you need it, drastically reducing glare and improving total efficiency. Click here to learn more: Total Internal Reflection (TIR) Optics | Stage Series Video. From there, while other options on the market lose as much as 10% of the light output shining through an outer lens, the custom-molded TIR optic in the Stage Series LED pods serves as both the optic and main lens for greater efficiency and light output (patent pending). Thanks to this innovative feature, when coupled with high-intensity LED chips, the total intensity of our pods is much greater than other LED pods using basic optics or reflectors with a standard outer lens. Functional Output. All Stage Series beam patterns were designed with optical simulation modeling, to shape the output in a highly-functional beam pattern. Flood pattern was designed to provide uniform, even illumination with a full 50×50 degree spread of light on the SSC1 LED pod. Unlike generic “flood” lights that are simply a heavily diffused spotlight, our flood pattern uses pillow optics on the outer lens surface, to provide a true optically designed spread, for even illumination throughout. Proven Reliability. Stage Series LED lighting has been extensively tested for long-term operation from -40 to 185 degrees F, along with vibration, moisture intrusion, and corrosion testing. All of these tests are completed to SAE standards, just like factory components. They’ve also been put to the test on-road by racers and enthusiasts alike. Experience. After over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. No matter what you’re driving, we pride ourselves in offering only the best possible LED solutions. Please contact us if you’d like to discuss your lighting project! Specifications Color Temp (CCT): 6000K Power (watts): SSC1 Sport: 12.8 Operating Voltage: 9-16V Current (amps @ 12.8V): SSC1 Sport: 1 Polarity: Polarity Specific Operating Temperature: -40C to 85C (-40F to 185F) LED Emitter: Cree XP-L HI Connector(s): Deutsch DT Input Driver Features: Constant Current Materials: Polycarbonate Lens, Aluminum Casting, Rubber Gasket Cooling: Passive, Pin-Fin heatsink Compliance Ratings: SAE J575 Durability Test Intrusion Ratings: IP67 Weatherproof Unit Weight (lb): 0.35 Product Weight (lb): SSC1: 0.65 C1R: 0.70 Shipped Weight (lb): 1.75 100% Satisfaction Guarantee Installation NOTE: If you would like to use a locking trailer pin to install this kit instead of the snap-fit pins, you can do so with a quick modification. Watch the video. Our C1R HitchMount LED Pod kit now includes a T-tap. For installation instructions, watch this video! Installation Time: 5-10 minutes Tools Needed: Basic Toolset Modification: None Warranty 8 Year Limited Warranty In addition to our standard 3 Year replacement warranty, this product carries an additional 5 years of protection against manufacturing defect, for a total of 8 years of warranty coverage. Click here to learn more. Shipping Shipping: We ship with FedEx, UPS, & USPS services. For Ground, 2-Day, 3-Day, and Overnight services, we may choose between FedEx & UPS depending on which carrier is more efficient for your specific order. Delivery time: Refer to the delivery estimate shown at the top of this page (desktop version). If you're using the mobile app, an estimated delivery date will be displayed under the product price. Payment We accept the following payment methods: Debit & Credit cards from Visa, Mastercard, Discover, American Express PayPal Google Pay & Apple Pay Please contact us if you have any questions. Customer Service We're here to answer questions 24/7. If you're on the mobile app, scroll down on the main listing to the "About the Seller" section, and click "Show More"; then, select "Ask Seller a Question" to send us a direct message. If you're using a desktop browser, click the "contact seller" link on the top right of the page, underneath "Seller Information". If you wish to reach us by phone, click "Contact Seller" and then under "select a topic", click "other" and you will be given our customer service phone number.

Price: 159.95 USD

Location: Salt Lake City, Utah

End Time: 2024-12-07T23:16:21.000Z

Shipping Cost: 0 USD