ClearOne Converge Pro 2 Audio Conferencing Controller 128D Part Num 910-3200-001

Description: ClearOne Conver Pro 2 128D Part number 910-3200-001-DRev 8.0 12 Mic/Line inputs with AEC8 Mic/Line outputsAECC link expansion busP-Link peripheral bus ApplicationsUSB audio interfaceEthernet, RS 232 GPIO InterfacePuilt in USB for PC based conferencingSound reinforcement applications Peripheral devicesBeamforming Mic Array 2Dialog 20 Wireless Mic SystemGPIO ExpanderUSB Expander Configuration Management and ControlConsoled software (must down load not included)Dialer app Win, Mac, Its, AndroidTouch Panel Controller with Clearone Controller (and other manufactures if compatible)Third-Party control modules Unless otherwise specified, all measurements are performed with a 20 Hz to 22 kHz BW (no-weighting).MIC/LINE INPUTS & OUTPUTSInputs: Balanced audio inputs, 3.81 mm Orange colorPhoenix/Euroblock type male header, Push-onmini-terminal blockOutputs: Balanced audio outputs, 3.81 mm Black colorPhoenix/Euroblock type male header, Push-onmini-terminal blockFrequency Response:20 Hz – 22 kHz @ +4 dBu, +/- 0.5 dBuEIN (Equivalent Input Noise):20 kHz BW, max gain, Rs = 150 Ω, -126 dBuTHD + N (Total Harmonic Distortion + Noise):• 20 Hz – 22 kHz @ +4 dBu, line level, 0.006%• 20 Hz – 22 kHz @ -56 dBu, mic level, < 0.04%Dynamic Range:20 Hz – 20 kHz @ 0 dB, >105 dBCrosstalk (Mic/Line):Channel to Channel, stimulus at 20 dBu to receptor at -56dBu, 1 kHz, < -98 dBInput Impedance:Balanced (line to ground), 2.2 kΩ, 1%Nominal Input Level:Adjustable -56 dB to 0 dB, 7 dB step coarse gainMaximum Input Level: -65 dBu to 20 dBuPhantom Power: 48 V, Impedance 6.81 kΩOutput Impedance:Balanced (line to ground), 95 Ω, 1%Output Level:0dBu (Nominal), 20 dBu (Max), -40 dBu (Selectable)USB AUDIOPort Type: USB-B connectorAudio: Digital Audio, 2 x 2 bidirectional channelsSample Rate: 48 kHzSample Bit Depth: 24-BitCompatible:• USB 2.0• USB 3.0ETHERNETPort Type:RJ-45, 10/100 Mbps Ethernet Network, Auto NegotiationIP address: IPv4 (IPv6 upgradeable through future s/w, f/wupgrade)DANTE™ and AES67 AUDIOPort Type: RJ-45 Gigabit Ethernet connectors for Primaryand Secondary PortsAudio: Digital Audio, 16 x 16 bidirectional channelsSample Rate: 48 kHz / 96 kHzSample Bit Depth: 24-BitAES67 Mode: Enabled through Dante controller softwareC-LINK EXPANSION BUSPorts Type: RJ-45 (Cat5e or Cat6)C-Link In & Out: Proprietary Expansion BusCable: Solid core, factory terminated Cat5e or 6 cableDistance:P-LINK PERIPHERAL BUSPorts Type: RJ-45 (Cat5e or Cat6)P-Link In & Out: Proprietary Peripheral BusPoE In:• P-Link In Port• PoE 802.3af Mode B, Midspan• Power on “spare pairs” 4,5 and 7,8• Input voltage range: 48 V to 56 VAudio: Up to 3 Beamforming Microphone Array 2 units +up to 3 DIALOG 20 Wireless Receiver units + Up to 3USB Expander units + Up to 3 GPIO Expander unitsCable: Solid core, factory terminated Cat5e or 6 cableDistance: Up to 200 ft (60 m)Long Distance P-Link:• Increases P-Link distance from 200 ft to 650 ft• 650 ft (200 m) maximum cable distance between anytwo units• Cat6, 550 MHz, 23 AWG, solid conductor cable• Do not use Copper Clad Aluminum (CCA) cable• Available only for BFM2 peripheral units• 48 V PoE Midspan Mode B power injector for 1 BFM2unit• 56 V PoE Midspan Mode B power injector for 3 BFM2unitsRS232Port Type: DB9 FemaleSettings: 9600/19200/38400/57600/115200 Baud;Serial Echo; Flow ControlSupport: Serial commandsGPIOPort Type:5.08 mm Green color Phoenix/Euroblock type maleheaderSupport: Control, Status, Variable Voltage ControlPower Pin: 5 V DC @ 350 mA Power SourcePin 1 to 4:• Open Collector Outputs: 40 VDC @ 250 mA• Active Outputs (Source/Sink): 5 VDC @25 mA• Logic Inputs: 40.2 kΩ pull up• Variable Voltage Control Inputs: 5 VDC maxGround Pin: GNDUSB CONTROLPort Type: USB-B connectorLocation: Front PanelCompatible:• USB 2.0• USB 3.0LEDsLocation: Front PanelStatus LED:• Off: Unit still initializing• Blue - Fast Blinking: Stack Syncing in progress• Blue - Slow Blinking: Unit not configured• Blue - Solid: Configured unit• Red - Fast Blinking: Stack Sync errorLocate LED:Blue - Blinking: Unit “Locate” command receivedPower LED:Blue - Solid: Unit is powered onTOUCH SENSORSensor Type: Capacitive Touch ButtonLocation: Front PanelPOWER & THERMALPort Type: AC InletMains Voltage: 100-240 V AC, 50/60HzPower Consumption: 50 Watts TypicalThermal: 170 BTU/Hr TypicalOperating Temperature:14 °F (-10 °C) to 104 °F (40 °C) Ambient TemperatureDIMENSION & WEIGHTRU size: 1 RUWidth x Depth x Height:1. Without rack-ears:17 in W x 10.73 in D x 1.72 in H (43.2 cm W x 27.3 cmD x 4.4 cm H)2. With rack-ears:19 in W x 10.73 in D x 1.72 in H (48.3 cm W x 27.3 cmD x 4.4 cm H)Unit Weight: 9.3 lbs (4.2 kg) (Approximately)Shipping Weight: 13.8 lbs (6.3 kg) (Approximately)PACKAGEPower Cord: 6 ft (1.8 m), Grounded, Qty 1Input Connectors:Terminal Block Connector, 3 Position (Orange), Qty 12Output Connectors:Terminal Block Connector, 3 Position (Black), Qty 8GPIO Connector:Terminal Block Connector, 6 Position (Green), Qty 1C-Link Cable:RJ-45 To RJ-45 Cable, 18 in (45.7 cm), Qty 1USB Cable: USB Type A to Type B, 6 ft (1.8 m ), Qty 1Rack Ears: Pre-installed, Qty 2Screw/Washer Kit: Rack Decor, Qty 4PART NUMBERSPart Number Product910-3200-001-D CONVERGE Pro 2 128D

Price: 579 USD

Location: Hooksett, New Hampshire

End Time: 2025-01-20T15:16:23.000Z

Shipping Cost: N/A USD