BSI BOB SMITH INDUSTRIES 3 PACK 103 108 113 THIN MED THICK CA GLUE SUPER

Description: BSI BOB SMITH INDUSTRIES 3 PACK 103 108 113 THIN MED THICK CA GLUE SUPER PEN KIT MALL PRESENTS:BSI BOB SMITH INDUSTRIES 3 PACK THIN MED THICK CA GLUEITEM # 103 108 113YOU WILL GET ALL THREE BOTTLES - ONE OF EACH VISCOSITY108 Insta-Cure+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ ™ should also be used. To prevent premature curing, don’t spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spread the CA out.Unscrew top from nozzle. For finer applications, use the extender tip. Apply Insta-Cure+™ CA to one side of the parts being joined, then hold them tightly together for 5-15 seconds. For larger bonding areas, apply serpentine beads of the CA with enough spacing to allow for the spreading of the adhesive. Insta-Set™ accelerator can be sprayed to cure the CA that oozes from joints. Full strength is reached in three hours. Wipe the nozzle clean before replacing screw-on top. Refrigerate to extend shelf life. Cured CA is stable from -40 to 220° F. Soak extender tip in acetone for cleaning.103 BSI Insta Cure Super Thin CA Glue:Insta-Cure™ has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonded must be tight fitting and should be held together while you apply the CA around the edges of the seam. At the moment CAs cure, they give off a vapor that can irritate the nose and eyes, so be prepared. Thin CAs work very well on balsa since they penetrate into the wood and form more than just a surface bond.113 BSI Maxi Cure Extra Thick CA Glue:Maxi-Cure™ extra thick CA is the best CA for most plastics, including GE’s Lexan MAXI-CURE™ is the best choice for plastic model assembly. When used with INSTA-SET™, it works better than any putty for modifying or filling voids. It can be carved with a knife or razor blade and sanded and feathered to form a finish indistinguishable from plastic. MAXI-CURE™ bonds fiberglass, hardwood, metal and rubber better than any other hobby adhesive. For gluing to the inside, clothtextured surface of fiberglass, scrape the area to be bonded with a razor blade or coarse sandpaper before using MAXI-CURE™ or any other adhesive. It also is best for bonding the tires for R/C cars.MAXI-CURE™ has proven to be very popular in the archery business for the fletching of vanes onto aluminum and carbon arrow shafts. Along with being the strongest, MAXI-CURE™ is usually the least expensive option for this application. Thank you for looking at our products! At The Pen Kit Mall we can assure you that we will give you the best possible experience purchasing on Ebay. We strive for 100% however if we should fall short of our goal please reach out to us to solve any issues that should arise before leaving negative feedback. Give us a chance to make it right.

Price: 37.99 USD

Location: Richland, Missouri

End Time: 2024-11-02T14:37:32.000Z

Shipping Cost: 0 USD